TeSys D contactor S207 - 3P (3NO) AC-3 9A =440V - coil 24V DC low. Label: TeSys D - range of product: TeSys D - poles description: 3P - pole contact composition: 3 NO - [Ue] rated operational voltage: = 690 V AC 25...400 Hzfor power circuit, = 300 V DCfor power circuit - [Ie] rated operational current: N/A, N/A - motor power kW: 2.2 kW at 220...230 V AC 50 Hz, 4 kW at 380...400 V AC 50 Hz, 4 kW at 415 V AC 50 Hz, 4 kW at 440 V AC 50 Hz, 5.5 kW at 500 V AC 50 Hz, 5.5 kW at 660...690 V AC 50 Hz - motor power hp: 1 hp at 230/240 Vfor 1 phase motorsAC 60 Hz, 2 hp at 200/208 Vfor 3 phases motorsAC 60 Hz, 2 hp at 230/240 Vfor 3 phases motorsAC 60 Hz, 5 hp at 460/480 Vfor 3 phases motorsAC 60 Hz, 7.5 hp at 575/600 Vfor 3 phases motorsAC 60 Hz, 0.33 hp at 115 Vfor 1 phase motorsAC 60 Hz - control circuit type: DC low consumption - [Uc] control circuit voltage: 24 V DC - coil type: low consumption - auxiliary contact composition: 1 NO + 1 NC - range: TeSys - [Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947 - overvoltage category: III - [Ith] conventional free air thermal current: 10 A at 60 °Cfor signalling circuit, 25 A at 60 °Cfor power circuit - Irms rated making capacity: 250 A at 440 Vfor power circuit conforming to IEC 60947, 140 A ACfor signalling circuit conforming to IEC 60947-5-1, 250 A DCfor signalling circuit conforming to IEC 60947-5-1 - rated breaking capacity: 250 A at 440 Vfor power circuit conforming to IEC 60947 - [Icw] rated short-time withstand current: 100 A - 1 sfor signalling circuit, 120 A - 500 msfor signalling circuit, 140 A - 100 msfor signalling circuit, 105 A at 40 °C - 10 sfor power circuit, 210 A at 40 °C - 1 sfor power circuit, 30 A at 40 °C - 10 minfor power circuit, 61 A at 40 °C - 1 minfor power circuit - associated fuse rating: 10 A gGfor signalling circuit conforming to IEC 60947-5-1, 25 A gG at = 690 V coordination type 1for power circuit, 20 A gG at = 690 V coordination type 2for power circuit - average impedance: 2.5 mOhm at 50 Hz - Ith 25 Afor power circuit - [Ui] rated insulation voltage: N/A, N/A - electrical durability: 0.6 Mcycles 25 A AC-1 at Ue = 440 V, 2 Mcycles 9 A AC-3 at Ue = 440 V - product name: TeSys D - power dissipation per pole: 1.56 W AC-1, 0.2 W AC-3 - protective cover: with - mounting support: rail,plate - standards: EN 45545 R22 HL3, EN/IEC 60947-4-1, EN/IEC 60947-5-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, EN 45545 R26 HL3, DIN 5510-2 - product certifications: CCC, CSA, EAC, UL, IEC - connections - terminals: control circuit - external diameter: 8 mm, power circuit - external diameter: 9.5 mm - tightening torque: N/A, N/A, N/A, N/A - operating time: 55...75 ms closing, 16...32 ms opening - safety reliability level: B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 - product or component type: contactor - mechanical durability: 30 Mcycles - maximum operating rate: 3600 cyc/h at 60 °C - device short name: LC1D - contactor application: resistive load,motor control - utilisation category: AC-1,AC-3 - Range Presentation: Contactor
- AC, DC, low-consumption DC control circuit- All types of starter: reversing or non-reversing, star/delta, by auto-transformer, etc- Connectors: spring terminal, EverLink terminal block, screw clamp, ring-type connection, Faston connector- Easy and simple direct mounting beetween contactor and circuit breaker, according to EverLink terminal block (from 40 to 65 A).Control RelayRelays with 5 poles as standard with 10A thermally rated contacts suitable for AC or DC control voltages. In addition a DC control circuit version with low consumption and built in suppression is available.
- 10A thermal contacts with operation down to 17V 5mA - Five pole with AC or DC operation - Variety of auxiliary contacts, timer modules and latching blocks- Four connection types: -
